How to CHANGE A TIRE | Safe & Easy Way

HowTOChangeATire

 

HOW TO CHANGE A TIRE

Disclaimer: The following are general principles. Always refer to your car owner’s manual for specific instruction on locating your jacking point and changing a flat tire. Also, it’s good to regularly check the air pressure in your spare tire whenever you do an oil change because you never know when you’ll get a flat tire. Lastly, make sure to respect the speed limit written on your spare tire because a spare tire isn’t like a standard tire.

What if you blow a tire at a place where even AAA won’t come? Follow these steps to safely and easily change a flat tire.

PULL OVER & SETUP
When you get a flat tire:
* Turn on your hazard lights.
* Pull over and park at a safe place with a level ground.
* Engage your parking brake. (Or if you have manual transmission, leave it on 1st gear.)
* Put a heavy object, like a large rock or brick, in front and behind the wheel diagonally across the flat tire. This will help prevent the car from slipping.

Now we’ll need 3 basic supplies. Most trunks carry a spare tire, jack, and lug wrench.
* Feel underneath the car, near the wheel with the flat. Usually there is a jacking point on the flat lip that runs along the side of your car. We’ll need to position the jack at the jacking point.
* Turn the jack clockwise so that it expands upward and touches the bottom frame of your car. But don’t lift the car yet … Because first we need to loosen the lug nuts while the car is still on the ground. We don’t want the car to fall from the jack, which can happen when you use force to unloosen the lug nuts.

1. PARTIALLY LOOSEN THE LUG NUTS
* The lug nuts might be visible or concealed behind a hub cab.
* Use the lug wrench to loosen the lug nuts partially. Do not remove them completely. Continue reading